CVSA Releases 2016 Brake Safety Week Results

Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInEmail this to someone

brakeinspectionweekCommercial motor vehicle enforcement members of the Commercial Vehicle Safety Alliance conducted 18,385 CMV and brake system inspections during Brake Safety Week, Sept. 11-17, 2016. Inspectors reported 13.2% of inspections with out-of-service brake violations and 14.8% of inspections with non-brake related out-of-service violations, each inclusive of some with violations in both categories.

During the week-long annual brake safety campaign, local, state, provincial, territorial and federal inspectors throughout the United States and Canada conducted inspections to identify out-of-adjustment brakes and brake systems violations. Roadside inspections included inspection of brake system components to identify loose or missing parts; air or hydraulic fluid leaks; cracked damaged or worn linings, pads, drums or rotors; and other faulty brake system components.

Inspectors also checked anti-lock braking system malfunction indicator lamps for compliance with jurisdictional regulations, an effort that was begun during CVSA’s unannounced Brake Check Day in May. Participating jurisdictions reported the number of trucks and buses with anti-lock braking systems as well as ABS violations observed.

The ABS survey for 2016 Brake Safety Week found the following:

Trucks

  • 93.2% of air-braked trucks (including tractors) inspected and 90.4% of hydraulic brakes trucks inspected required ABS, based on their date of manufacture.
  • 89.4% of air-braked trailers inspected required ABS, based on their date of manufacture.
  • 8.8% of ABS-required, air braked trucks and 8.8 percent ABS-required, hydraulic-braked trucks were found with ABS violations.

Trailers

  • 15.8% of trailers requiring ABS were found with ABS violations.
  • 7.6% of trailers inspected were not air- or hydraulic-braked and therefore not subject to ABS requirements.

“Brakes must be routinely checked and properly maintained to ensure the safety of the commercial motor vehicle, the CMV driver and everyone else on the road,” said Julius Debuschewitz of Yukon Highways and Public Works, CVSA president. “Although brake inspections are a part of the Level I inspections conducted by our hard-working CMV inspectors every day, Brake Safety Week is an opportunity to remind motor carriers and drivers of the importance of brake health and safety, and it provides the opportunity for our inspectors to conduct targeted and focused inspections to identify and remove commercial motor vehicles that have brakes with critical violations from our roadways.”

Brake Safety Week is part of the Operation Airbrake Program sponsored by CVSA in partnership with FMCSA and the Canadian Council of Motor Transport Administrators. The Operation Airbrake Program is an international enforcement activity dedicated to preventing large truck and bus crashes, and saving lives throughout North America. The campaign seeks to highlight the importance of proper brake inspection and maintenance in an effort to reduce the number of brake-related violations discovered during a roadside inspection.